Skip to content
Home & homewear i bambus

How fabric weight is measured in practice

Short answer: You cut out a piece of known size, weigh it and convert to one square metre. The number is always measured on relaxed fabric, not on a garment in use. That makes it comparable, but it is not the whole story of how a fabric feels.

A round cutter and a scale

In a lab, a round cutter with a fixed area is used. It cuts a sample from the fabric, and the sample is weighed on a fine scale. Because the area is known in advance, nothing needs measuring, and the result is more exact. The method is simple and works for many kinds of fabric.

From sample to square metre

The weight is scaled up to one square metre. If a sample of one hundred square centimetres weighs one gram, that equals one hundred grams per square metre. That is why the figure is called area weight. It tells how much material sits on a given area, nothing about how thick or warm the fabric is.

The fabric must rest first

Fabric that has just come off the roll is stretched. The sample must lie flat for a day in a room with fixed temperature and humidity before weighing, so the fibres can relax and take up moisture. Without rest the weight can vary. See bamboo polos for men.

Why two numbers can differ

If a fabric is measured before and after washing, the numbers differ because the fabric shrinks. The same amount of material sits on a smaller area, and the gram figure rises. Both numbers are right but describe two states. Always ask when it was measured. See home and homewear in bamboo and bamboo fitted sheets.

Construction matters more than the number

The same weight can give very different fabrics, because knit, weave and density behave differently. A knitted fabric has air between the loops, a woven one lies dense and flat. So two fabrics with the same gram figure can feel different in the hand. The number is a good start, not proof of how a garment feels or drapes.

How to measure at home

You can make a rough measurement yourself. Weigh a garment on a kitchen scale, measure width and length and work out the grams per square metre, remembering a garment has a front and a back. The result is only approximate. It suits comparing two garments of the same kind, not comparing with a lab figure.

Why it is rarely on the product page

The weight is rarely on the product page because most buyers do not use the number and because it can be misread. A figure without explanation makes some think more is better, or that two fabrics with the same number are alike. Words like soft, light or dense are more useful, with the composition telling the rest.

A higher number is not better

A higher number means more fabric per area, not better fabric. A heavy fabric can be warm and stiff, a light one cool and soft, and both can be good for their purpose. The right number depends on what the garment is for, not on how high it is. Choose by use and let your hand decide the rest.

In short

Fabric weight is found by weighing a cut sample of known size and converting it to one square metre. The number helps when you compare like fabrics under like conditions, but it does not say everything. Feel the fabric, look at the construction, and ask when it was measured if you want to use the number.

Frequently asked questions

Can I measure it at home

Yes. Weigh a garment, measure its area and work it out. It gives a rough number, best for comparing your own garments with each other, not for comparing with lab measurements.

Why is the weight rarely on the product page

Because most buyers do not use the number and because it can be misread. Words like soft, light and dense often say more about how the fabric feels day to day.

Is a higher number better

No. It means more fabric per area, not better fabric. A heavy fabric can be warm and stiff, a light one soft and cool, so it depends on how you use it.

You can find the full range at Bamboo-Clothing.com.

The products from this article

See all (Home & homewear in bamboo)