Skip to content
Bambus underbukser til herre

What the size marking is based on

Short answer: The letter on the label stands for a set of body measurements that the brand has chosen itself. No shared rule says what an M has to equal. That is why the size chart on the product page decides whether a garment fits, and not the letter.

The letter is an abbreviation

An S, M or L is only a short way of writing a set of body measurements. Behind an M sit measurements for chest, waist and hip, and those decide whether the garment fits you, not the letter itself. The letter simply keeps the label short enough to fit on a tag and in a sorting list.

What the measurements tell you

The measurements describe how much room the garment leaves at the chest, waist and hip. Some garments are cut close, others fall loose. That is why a letter alone does not say how a garment sits, and you get the most from reading the numbers and thinking about how you like your clothes to fit.

The brand chooses its own measurements

Two brands can each have their own set of measurements behind the same letter. There is no shared rule for what an M should be, so each brand decides for itself from its patterns. That is why two Ms do not always fit alike. It applies to the bamboo dressing gown for men too, where the page measurements are what to follow.

Why two Ms do not fit alike

If an M fits perfectly in one brand, an M from another brand can feel a little too big or too small. It is not you who has changed, and it is not necessarily a fault in the garment. It is simply two different sets of measurements using the same letter as a heading.

The size chart is the right place to look

The product page lists the actual measurements, and you can compare them with a garment you already own. Lay it flat, measure it, and find the size that comes closest. That works for everything from bamboo underpants for men to larger pieces, where the fit matters every day.

Compare with a garment you know

The easiest way is to take a garment that fits well and measure it flat from edge to edge. You can then hold those numbers up against the chart on the product page. That way you avoid guessing what the letter means at that brand, and you avoid ordering two sizes and sending one back.

Numbers on some labels

Some brands print a number instead of a letter. The number often points straight to a body measurement in centimetres and is easier to use than a letter, because you can measure yourself and compare. You should still check which measurement the number refers to, whether chest, waist or hip.

When you are between two sizes

If you are between two sizes, look at the size chart and choose by how close you want the garment to sit. For a loose fit, take the larger one. For a close fit, take the smaller one. If the garment is knitted or stretchy, it often gives a little, which can make the choice easier.

Textiles other than clothing

For bedding and other textiles it is almost always the measurements you should read, not a letter. Read the measurements on the product page for the bamboo envelope sheets and compare them with your mattress. The same habit that works for clothes works here too: look at the actual numbers, not the name.

Frequently asked questions

Is there a shared standard

There are guidelines, but they are not binding, and many brands use their own measurements. That is why the size chart on the product page always gives the right answer.

Why do some labels show numbers

Numbers often point straight to a body measurement in centimetres and are easier to use than letters, because you can measure yourself and compare against the number without guessing.

What do I do when I am between two sizes

Look at the size chart and choose by how close you want the fit. If you prefer it loose, take the larger size, and if you want it close, take the smaller one.

You can find the full range at Bamboo-Clothing.com.

The products from this article

See all (Bamboo underpants for men)