Skip to content

Why medium is the starting point

Short answer: M sits in the middle of the range the brand sells. If the system is built from the middle, the distance to the extremes is shortest, and errors stay smaller. Here is why medium is the natural starting point and what that means for you.

The middle gives the smallest error

Starting from M and going both up and down, there are only a few steps to each end. Errors in the jump do not have time to pile up, because every size sits close to the base. If you started at the smallest size instead, all the steps would go one way and the errors would stack.

M often sells the most

The best selling size is also the one tried most, so that is where a brand hits the mark most reliably. Many brands choose M because it sits in the middle of the range and reaches the most customers, so experience of the fit is greatest right here. See the bamboo T-shirt dresses.

The extremes are tried too

Careful work tries on both the smallest and the largest size, precisely because they sit furthest from the base. That is where the risk of error is greatest and where bodies differ most. A fitting at the ends shows whether the jumps hold. See bamboo sports bra and bamboo petticoat.

Why not start at the smallest

If you start at the smallest size, every other size has to be calculated upwards. The error then grows with each step and is largest in the largest size. From the middle, the distance is split in two, and the longest route gets shorter. It is a simple rule: the shorter the distance, the smaller the error.

M is not always the base

No. Some brands use S or L, depending on what sells most for them. If a brand has mostly customers at the smaller end, it makes sense to build from S, because that is where most fittings and most experience sit. The letter on the label therefore does not tell you where the base is.

Does it mean M is sewn best

No, but it is often the size tried the most times. That gives a good chance that it fits as intended, but it does not mean the other sizes are worse. A good system makes sure every size holds the same standard, including those at the ends.

Why you notice a difference in XS and XXL

Because they sit furthest from the base, and because bodies vary most at the ends. The jumps have travelled a long way from what was tried first, and a small deviation matters more. It is not necessarily a sign of poor work, but a consequence of how the system is built.

How to choose if you are between two

If you fall between two sizes, think about how close to the base you are. In the middle you can trust the letter more, and at the ends you should read the size chart more carefully. Think about the fabric too: a stretch fabric forgives more than a stiff one and makes the choice easier.

Use the size chart as the answer

Letters tell you where you are on the scale, but the size chart tells you what the size is. Measure yourself and compare with the numbers for the model you want to buy. It is the surest way to find your size, whether you sit in the middle of the range or out at an end.

Frequently asked questions

Is M always the base?

No. Some brands use S or L, depending on what sells most for them. The label does not say where the base is, so use the size chart when you want to know how a size is meant.

Does it mean M is sewn best?

No, but it is often the size tried the most times. A good system makes sure every size holds the same standard, including the smallest and the largest in the range.

Why do I notice a difference in XS and XXL?

Because they sit furthest from the base, and because bodies vary most at the ends. The jumps have travelled far from what was tried first, so small deviations matter more there.

You can find the full range at Bamboo-Clothing.com.

The products from this article

See all (Bamboo T-shirt dresses)