What a tensile test shows
Short answer: A tensile test clamps a strip of fabric between two jaws that are pulled apart until the fabric breaks. The machine records both the force and how far the fabric stretched first. The numbers are used to compare fabrics against a requirement.
A strip in two jaws
A narrow strip of the fabric is clamped between two jaws in a machine. One jaw moves slowly away from the other, and the strip is pulled longer and longer. The pull continues at an even speed until the fabric tears. Everything that happens along the way is measured and written down.
Two numbers from one sample
Two things are measured: how hard the pull had to be, and how far the fabric gave before it broke. Both say something about the fabric. The first tells you about strength and the second about how much it can stretch. A fabric can be strong and stiff, or softer and more yielding.
The direction must be noted
A knitted fabric holds differently lengthwise and crosswise, because the stitches lie in a set direction. That is why samples are run in both directions, and the direction is written down with the number. Otherwise it is easy to compare apples with pears. See CCDK.
Newtons and kilos
Force is measured in newtons, but many convert it to kilos in everyday speech. That is a practical simplification, and it helps you picture the size. If you want to compare numbers from different sources, it matters that they are given in the same unit.
What the breaking point tells you
The breaking point is the moment the fabric gives up. The force at that time and the length reached give two numbers that can be set beside the requirement in a specification. If they fall below it, the fabric may be too thin, too loosely knitted or made from a yarn that does not suit the purpose.
The number does not say everything about use
Clothes rarely break in a straight, even pull. Wear, rubbing and seams are more often the cause when something gives way in daily life. So the tensile test is only one part of the picture and should be read together with other tests. See Moodies and Lindbergh.
Comparison with the requirement
The result only has value when compared with a requirement. That may be a company's own specification or a shared standard. You do not just ask whether the fabric is strong, but whether it is strong enough for the garment it is meant for. A sock and a jacket make very different demands.
Knits and stretch tests
For knits the tensile test is often paired with a test that measures how far the fabric stretches and whether it springs back. A fabric that does not break can still turn slack and lose its shape. You only see that when you measure both strength and elasticity.
Frequently asked questions
Is it measured in kilos
Force is measured in newtons, but many convert it to kilos in everyday speech because it is easier to picture. What matters is that numbers are compared in the same unit and under the same conditions.
What is a good value
It depends entirely on fabric type and weight. The number is compared with the requirement in the specification, so a good value for a thin sock is very different from a good value for a sturdy jacket fabric.
Are tensile tests used for knits
Yes, but often together with a test that measures how far the fabric stretches and whether it returns to shape. Knits can give a lot before they tear, so both values need to be judged.
You can find the full range at Bamboo-Clothing.com.




