Skip to content

problemer

What you should know about clothes and moths

Short answer: Moth larvae eat protein fibres like wool and silk. Bamboo viscose and cotton are cellulose and are main...

What you can do about clothes that have gone stiff

Short answer: Stiff fabric comes from residue in the fibres, most often from detergent, fabric softener or lime. Two ...

What happens to clothes if you use too much detergent

Short answer: Excess detergent does not get rinsed out. It stays in the fibres, makes the fabric stiff, holds odour a...

Bamboo clothing and what to do about a loose thread

Short answer: Never cut a loose thread on a knitted fabric. Pull it carefully through to the inside with a needle, an...

Bamboo clothing and how to stop it clinging

Short answer: Clothing clings from static electricity or from a light fabric settling against the body. The two cause...

Laundry that does not come clean and what causes it

Short answer: Four things most often go wrong. The machine is too full, the dose is wrong, the temperature is too low...

Bamboo towels and why they lose their absorbency

Short answer: A towel that does not absorb has a film on the fibres. Fabric softener is the most common cause, and to...

Why clothes smell even after washing

Short answer: Either the smell sits in the washing machine, or fabric softener and detergent residue bind the odour c...

Bra straps that slip down and what to do about it

Short answer: Straps slip when they are too loose, when they sit too far out on the shoulder, or when the shoulders s...

Why the bra band rides up at the back

Short answer: The band rides up because it is too loose. The weight pulls from the front and downwards, and a loose b...

Underwear and light clothing and what shows through

Short answer: Under light clothing it is contrast that shows. A brief in a skin tone disappears, a white one stands o...

Briefs under tight trousers and how to avoid edges

Short answer: A visible edge comes from an elastic thicker than the fabric around it. The answer is a laser cut edge,...