Skip to content

bambus

What lifetime to expect measured in hours worn

Short answer: A garment is worn by hours in use and by the number of washes, not by how long it has lain in the wardr...

Why a worn garment can still be used

Short answer: Wear rarely hits the whole garment at once. A thinly worn area at the elbow does not mean the rest of t...

When wear is cosmetic and when it is structural

Short answer: Cosmetic wear changes the look, but not what the garment can do. Structural wear means the fabric has l...

How to measure wear on a garment

Short answer: Hold the garment to the light, measure two points with a tape and feel it with your fingers. The three ...

Why clothes wear most in the first months

Short answer: Because the loose fibre ends and the outermost finish disappear first. Once they are gone, the rest of ...

What overfilling the machine does

Short answer: An overfilled machine gives more friction and less cleaning. Garments cannot move freely, so they scrub...

How a hard wash wears clothes extra

Short answer: A hard wash means high temperature, fast spinning and strong drum movement all at once. Each of the thr...

Why a towel loses its absorbency

Short answer: Because residue from softener and limescale settles on the fibre and closes the surface. Water then can...

What wears out a sheet

Short answer: A sheet is worn by the body's movement at night, by the mattress surface, by washing and by sunlight th...

Why edges fray

Short answer: Because an edge is where the fabric ends, with no neighbours left to hold on. Rubbing therefore pulls f...

How seams open over time

Short answer: The thread in a seam tires from repeated pull, and stitch by stitch it gives way. The opening usually s...

What wear does to the colour

Short answer: Wear removes the outer layer of the fibre, where the dye sits closest. That is why worn areas turn ligh...