Skip to content

bambus

Why 180 grams feels thinner in knit than in woven fabric

Short answer: Knit holds air between the loops, while woven fabric lies flat and dense. The same weight spread over m...

How fabric weight is measured in practice

Short answer: You cut out a piece of known size, weigh it and convert to one square metre. The number is always measu...

Why the toe seam can be felt in the shoe

Short answer: The toe seam sits exactly where the shoe is narrowest and the foot bends. A few extra millimetres of fa...

How a sock is closed at the toe

Short answer: A sock leaves the machine as an open tube. The toe is closed either with a seam or by the machine linki...

Printed labels at the neck against sewn labels

Short answer: A printed label is colour applied directly to the fabric, and a sewn label is a piece of woven tape. Pr...

Why the care label sits in the side seam

Short answer: In the side seam the label stays clear of both neck and skin, and it can be sewn in without an extra st...

What a bar tack is for

Short answer: A bar tack is a short, very dense block of stitches that sits across a stressed point. It holds the fab...

How a pocket is built on the inside

Short answer: A pocket consists of an opening, a bag and a reinforcement at each end. The bag hangs freely inside the...

Why the seam sits on the outside in sportswear

Short answer: Turning the seam outward removes the inner edge that otherwise lies against the skin. That reduces chaf...

Binding against rib edge

Short answer: A binding is a narrow strip of fabric laid around the edge, while a rib edge is a knitted band that pul...

What happens when a seam is pulled askew

Short answer: If one layer of fabric is fed forward faster than the other, the seam ends up longer on one side. The r...

Why dense stitching is not always strongest

Short answer: Every needle makes a hole in the fabric. If the sewing is too dense, the holes end up so close together...